There are many kinds of working procedures for stone flour machine-made flour. The milling process affects the effect of milling process. Let's understand the design principles of milling process

1、采用合理的制粉方法。根據產品的質量要求、原料的品質、生產規模，以及單位產量、電耗指標等，確定合理的制粉方法，即制粉流程的長度、寬度和清粉范圍。

1. Reasonable milling method should be adopted. According to the product quality requirements, raw material quality, production scale, unit output and power consumption index, the reasonable milling method is determined, that is, the length, width and cleaning range of milling process.

2、流量平衡。石磨面粉機制粉流程中各設備、各系統的配備，應根據各系統物料的工藝性質及其數量來決定，使負荷合理。

2. Flow balance. In order to make the load reasonable, the equipment and system should be determined according to the technological properties and quantity of materials in each system.

3、質量平衡。將粒度接近、品質相近的物料合并處理，以簡化制粉流程，方便操作。不同品質要求的產品對在制品分離和組合的要求不一，質量平衡直接影響產品質量和出率。

3. Mass balance. The materials with similar particle size and quality are combined to simplify the milling process and facilitate operation. Products with different quality requirements have different requirements for separation and combination of WIP, and quality balance directly affects product quality and yield.

4、循序后推：制粉流程紅對在制品的處理不能有回路，一般應逐道循序后推的原則。

4. Step by step backward: there should be no loop for the processing of work in process in the milling process. Generally, the principle of step by step backward should be adopted.

5、保證工藝過程的連續、穩定和靈活性。凈麥、吸風粉及成品打包前應設一定容量的緩沖倉，以保證生產的連續性;設備配置和選用應考慮原料、氣候、產品的變化，保證生產的穩定和適應性;工藝中可設置活路，是工藝具有一定的靈活性。

5. Ensure the continuity, stability and flexibility of the process. A buffer bin with a certain capacity should be set up before the packaging of wheat flour, suction powder and finished products to ensure the continuity of production; the changes of raw materials, climate and products should be considered in the configuration and selection of equipment to ensure the stability and adaptability of production; the flexible path can be set in the process, which means the process has a certain flexibility.

6、節省投資，降低消耗，清潔生產。制粉流程設計中應選用低耗設備，在保證產量和質量情況下盡量簡化制粉流程，減少設備數量、降低能耗。工藝設計中還應注重清潔生產，保證產品衛生。

6. Save investment, reduce consumption, clean production. High efficiency and low consumption equipment should be selected in the design of pulverizing process. Under the condition of ensuring the output and quality, the pulverizing process should be simplified as much as possible to reduce the number of equipment and energy consumption. Cleaner production should also be paid attention to in process design to ensure product health and safety.

以上就是石磨面粉機制粉流程，面粉機研制粉，要根據制粉流程制做，來保證制粉效果。

The above is the milling process of stone mill flour machine, flour machine development flour, according to the milling process, to ensure the milling effect.